Installing The Es80 Operational Software - Simrad ES80 Reference Manual

Simrad ES80 Reference Manual
Procedure
1 Open the
Setup
2 Select to open the dialog box.
About
3 Find the information that you need.
4 Select to close the dialog box.
Close
Further requirements
Certain software upgrades for the ES80 also include an upgrade for the Wide Band
Transceiver (WBT). To ensure maximum operational performance, these software
versions must always be compatible.

Installing the ES80 operational software

If your ES80 Wideband fish finding echo sounder is provided with a Processor Unit, the
ES80 software has already been installed. If you intend to use your own computer, you
must install the software yourself.
Prerequisites
In order to install the software, you need the relevant file set on a suitable media. If the
software is provided on a CD or a DVD, and your computer is not fitted with a suitable
drive, copy the files to a USB flash drive.
Note
Make sure that you have administrative rights on the Processor Unit. You need this to
install the software. If you purchased your own computer, you must verify that it meets
the technical requirements for use with the ES80. Do this before you install the software.
Context
One or more valid software licenses are required to operate the ES80. The software
licenses are installed after the ES80 software installation. The
provided for this purpose.
Note
You need administrative privileges on your computer to do the software installation.
Procedure
1 Turn on the Processor Unit.
2 Switch off any firewall applications.
190
menu.
page is
Software License
406273/C