Accessing And Retrieving Message Log Files - Simrad ES80 Reference Manual

Procedure
1 Obtain the new help file.
a Download the help file from the ES80 pages on
a computer.
b Change the name of the file to
c Copy the file to a USB flash drive.
2 Observe the
Screen Captures
3 Select the
Screen Captures
4 In the browser, select
5 Navigate to the folder with the on-line help files.
c:\Program Files\Simrad\NGE\ES80\ES80_Settings\Language
Observe that the folder contains one sub-folder for each language. Examples are
"en" for English, "es" for Spanish and "de" for German. Language folders may be
missing. In such cases, the ES80 help is provided in English.
6 Add the new help file.
a Create a folder for the new language.
Make sure that you use the correct folder name.
b Copy the downloaded file
language folder.
7 Close the file manager utility.
8 Restart the ES80.

Accessing and retrieving message log files

ES80 uses messages as a part of the built-in test equipment (BITE). The messages offer
information about the operational status of the ES80. Whenever the ES80 issues a
message, it is shown in the
in a number of log files on the Processor Unit hard disk. If you experience abnormal
behaviour, and wish to consult support, these log files are very useful.
Prerequisites
You need a USB flash drive, a portable hard disk, or another storage device to keep the
log files. It is assumed that you are familiar with the Microsoft
utilities for file handling.
406273/C
ES80.chm
tab at the bottom of the ES80 presentation.
tab to open the screen capture browser.
to open the operating system folder.
Open Image Folder
from the USB flash drive to the correct
ES80.chm
dialog box. Simultaneously, all messages are stored
Messages
Operating procedures
https://www.simrad.com
® operating system
to
209