Simrad ES80 Reference Manual page 72

Simrad ES80 Reference Manual
• : This channel is vacant and ready for use.
Available
Note
When you work in the
changes made on a page. You must do this before you continue working on a different
page.
Procedure
1 Open the
Setup
2 On the menu, select
Setup
Observe that the
of pages selected from the menu on the left side.
3 On the left side of the
Transceiver pages, page 352
Transceiver Installation page, page 353
4 Install the channels(s).
a Observe that the transceiver(s) you have connected to the Processor Unit are
listed.
Each transceiver is identified with type and serial number. The available
channels on each transceiver are listed separately.
b For each channel, choose which transducer to connect to.
The list of transducers available for installation is defined by those you
installed on the
Note
This is a critical task. Make sure that the correct transducer is selected.
c Observe that the status for the relevant frequency channels change to Installed.
70
dialog box, you must always select
Installation
menu.
Installation
dialog box opens. This dialog box contains a number
Installation
dialog box, select
Installation
page.
Transducer
.
Transceiver
to save the
Apply
.
406273/C