Simrad ES80 Reference Manual page 240

Simrad ES80 Reference Manual
Description
The depth measure by the selected channel is
shown. In this context, the phrase channel is used
as a common term to identify the combination of
transceiver, transducer and operating frequency.
Tip
By default, the depth is shown in meters. You can
change the measurement unit on the
The page is located in the
Units
Selecting in the Depth information pane opens the
Setup
Information Pane Options
are to define the upper and lower depth limits most likely to be used during the ES80
operation.
Tip
If you have problems with bottom detection, you may consider disabling it. This can be
useful if you only wish to study targets in the water column. Use the dedicated
function.
Detection
Before you open an information pane, you must first click in an echogram view to
make it "active". By doing this you select the channel. In most cases, the data in the
information pane is only valid for the selected channel. In this context, the phrase
channel is used as a common term to identify the combination of transceiver, transducer
and operating frequency.
You can easily change the physical size and shape of each information pane.
Click in its lower right corner, and drag to a new size. To reset the information
pane to its default size, select the
The function allows you to adjust how much you are able to see "through"
Transparency
the information panes you have opened. You can adjust the setting from 0% (no
transparency) to 90% (almost full transparency) in steps of 10%.
Details
Close
Select this button to close the information pane. The pane closes
immediately. If you wish to reopen it, simply click the button on the top
bar one more time.
238
page.
Units
dialog box.
Installation
dialog box. The purpose of the
button in its top right corner.
Reset size
page in the
Bottom Detection
parameters
Bottom Detection
Bottom
406273/C