Units Page - Simrad ES80 Reference Manual

Simrad ES80 Reference Manual
Note
The
Synchronization Delay
port on your Wide Band Transceiver (WBT) to synchronize the ES80.
Synchronization Port
This is the interface port currently used to transmit or receive synchronization
signals. It can be a serial port or a connection using the Auxiliary socket on the
Wide Band Transceiver (WBT). Since the synchronization function only uses the
Request To Send (RTS) and Clear To Send (CTS) signals on a serial port, you can
use a port that is already used for other purposes. For the same reason, you do not
need to define any baud rate.
Note
If you use more than one Wide Band Transceiver (WBT) in your ES80 system,
all synchronization input signals to the
the same source. Individual synchronization of a single Wide Band Transceiver
(WBT) is not supported.
If you use more than one computer in your ES80 system, the synchronization inputs
Auxiliary
to the
If you use the trigger functionality provided by the
Wide Band Transceiver (WBT), the ES80 can not operate in Master mode. This
function is not supported by the ES80.
Return to...
Installation dialog box, page 346
Related tasks
Synchronizing the ES80 by means of a serial port, page 185
Synchronizing the ES80 by means of a serial port, page 185

Units page

The ES80 user interface presents many measurements. These measurements are for
example related to depth, range or distance. The choices on the
control which units of measurements that are used.
Prerequisites
The dialog box is not available when your ES80 is set to Replay mode.
Installation
378
functionality is unavailable if you use the
ports can not be used. This functionality is not supported.
Auxiliary
ports must be provided by
Auxiliary
Units
Auxiliary
connector the
page allow you to
406273/C