Simrad ES80 Reference Manual page 403

•
Transducer
The ES80 can be set up to work with one or more transceivers. In turn, each
transceiver is assigned one or more transducers. By means of the
you can check the impedance of each transducer during normal operation. Any errors
are then easily detected.
BITE: Transducer page, page 407
•
Noise
The operational performance of the ES80 Wideband fish finding echo sounder
depends on the noise conditions. It is essential that the noise signature is as low as
possible. The
Noise
the equivalent ambient noise. Your ES80 must be set to Passive mode.
BITE: Noise page, page 409
Note
The (Built-In Test Equipment) dialog box and functionality is only provided for
BITE
performance monitoring. The functionality is not required for normal use of the ES80.
The dialog box does not permit you to change any operational parameters.
BITE
Topics
BITE: Processor page, page 402
BITE: Sensors page, page 404
BITE: Transceiver page, page 405
BITE: Transducer page, page 407
BITE: Noise page, page 409
406273/C
page provides information about the current estimated noise, and
Functions and dialog boxes
Transducer
page,
401