Simrad ES80 Reference Manual page 398

Simrad ES80 Reference Manual
Details
Installed Outputs
The
Installed Outputs
an output type, select it in the
• Select
Remove
• Select to change the settings.
Edit
• Select
New
Output
Select which information to export. The following sensor data can be exported:
• Navigation
• Motion sensor
Output Destination
You can export the data on a communication port (serial or LAN) on the Processor
Unit.
• : Select
Port
your Processor Unit. Select which serial or LAN port to use for the output data.
•
Inspect Port
select
Inspect Port
setup dialog box opens. You are not permitted to make any changes.
You can not define the communication port parameters here. If you need to
adjust these, you must select
parameters. The
boxes.
• : Select
Monitor
dialog box allows you to study the communication stream on the chosen serial
line or LAN port.
Add
Select to start export of the chosen data format. Once an output type has been
Add
defined, it is listed in the
Remove
Once an output type has been defined, it is listed in the
the left side of the page. To remove the output, select the relevant format in the
Installed Outputs
Edit
Once an output type has been defined, it is listed in the
the left side of the page. To edit the settings of a specific output, select it in the
Installed Outputs
output settings, select
396
box lists all the currently selected outputs. To remove or edit
Installed Outputs
to delete the output.
to add a new output.
if you wish to send the information to a communication port on
Port
: Once you have selected a serial or Ethernet communication port,
to inspect the current port parameters. The relevant port
I/O Setup
page is located in the
I/O Setup
to open the
Monitor
Installed Outputs
box, and then select
box, and then select
to keep the changes.
Save
box.
after you have defined the data output
Installation
dialog box. The
Port Monitor
box on the left side of the page.
Installed Outputs
.
Remove
Installed Outputs
. Once you have finished editing the
Edit
and dialog
Output
Port Monitor
box on
box on
406273/C