Simrad ES80 Reference Manual page 449

Description
The dialog box
Port Monitor
provides one text box for
incoming messages (
and one for outgoing messages
( ). Use these boxes
Tx Data
and your knowledge of the data
communication to investigate
the datagrams.
Note
The dialog box is
Port Monitor
a tool for debugging purposes.
It is neither required nor
intended for normal operation
of the ES80.
Details
Tx Data
This text box displays the data communication exported from the ES80 to external
devices. If you have enabled
with new information.
Rx Data
This text box displays the data communication received by the ES80 from external
devices. These external devices may for example be navigation sensors, motion
reference units, or other hydroacoustic systems. If you have enabled
the text box is continuously updated with new information.
Auto Update
When this function is activated, the relevant text box is continuously updated with
new information. If you wish to "freeze" the information for further investigation,
deactivate to disable the automatic update.
Hex display
Select this to show the information in the relevant text box in hexadecimal format.
Delete
This function clears the text box to allow a new stream of communication data to
start on a blank page.
Current port
This box identifies the port you are currently monitoring.
406273/C
),
Rx Data
Auto Update
Functions and dialog boxes
, the text box is continuously updated
,
Auto Update
447