Adding Scale Labels To The Echograms - Simrad ES80 Reference Manual

6 Apply the change you have made.
a Select
Apply
echogram view.
b Select
Apply to All
of the same type.
7 Select to close the dialog box.
OK

Adding scale labels to the echograms

In order to identify the horizontal scale of your echogram views, you can enable scale
labels.
Context
Small labels are shown in the bottom left and right
corners of the echogram. These labels can contain
time or distance to identify the horizontal axis of the
echogram. You can hide the labels from view.
The following label options are available.
• : The labels are hidden
None
• : The horizontal scale is set automatically
Auto
• : The horizontal scale is defined by time.
Time
The time shown in the bottom right corner of the
echogram is then the current time (now).
• : The horizontal scale is defined by distance.
Distance
The distance shown in the bottom right corner of the
echogram is then 0 nautical miles (starting point).
This is a visual enhancement. It does not have any
effect on the ES80 performance.
Procedure
1 Click once in the echogram view that you wish to change.
This will make the view "active". A thick border is placed on the selected view
to visualize this.
2 Open the
Active
3 Select
Echogram
Observe that the
4 On the left side of the
5 Choose the label you wish to use.
406273/C
if you wish to apply the chosen setting only to the currently active
if you wish to use the chosen setting on all the echograms
menu.
.
dialog box opens.
Echogram
dialog box, select
Echogram
Operating procedures
to open the page.
Horizontal Axis
117