Simrad ES80 Reference Manual page 318

Simrad ES80 Reference Manual
• Normal mode allows the ES80 to transmit ("ping") through the water, and to receive
the echoes.
• Replay mode allows you to play back previously recorded data.
Click the middle of the
Tip
When you set the ES80 to Replay mode, select the
dialog box allows you to choose which file(s) to play back. To control the actual
playback, use the replay bar. The replay bar opens automatically at the top of the ES80
presentation when you choose Replay mode.
Note that Inactive operating mode is not the same as Passive mode. While Inactive mode
stops both transmission and reception, Passive mode will still allow the ES80 to receive
echoes. If you wish to switch to Passive mode, use the
The current operational mode is also shown in the
Details
Inactive
Select this option to disable the ES80 operation. Neither transmission nor reception
will take place. When the ES80 has been disabled using this function, it will stop.
The current echoes will be removed from the presentation.
Normal
Select this option to start normal operation. The ES80 will now transmit ("ping"),
and then receive the echoes. The information is processed in the Processor Unit,
and the resulting data are shown in the ES80 presentation.
The ES80 will transmit according to the currently selected "ping" parameters.
Note
The ES80 will transmit ("ping") only if
If you wish to establish a passive system (transmission switched off, but normal
reception), use the function offered by the
316
button to select mode.
Operation
button. The
Replay File
Normal Operation
menu.
Extras
is set to On.
Ping
Normal Operation
Replay File
dialog box.
dialog box.
406273/C