Olex Output Page - Simrad ES80 Reference Manual

Save
Once you have finished editing the output settings, select
Return to...
Output dialog box, page 386
Related tasks
Exporting sensor data to a peripheral system, page 180
Datagram formats
NMEA datagram formats, page 491
Proprietary datagram formats, page 504
Third party datagram formats, page 517

Olex Output page

The ES80 allows you to export data to the proprietary Olex system. The output
parameters for the data export are defined in the
Prerequisites
The dialog box is not available when your ES80 is set to Inactive mode.
Output
How to open
This page is located in the
the menu.
Setup
Description
The settings allow you to define which port (serial or Ethernet) to use when
Olex Output
exporting information to the Olex. Only one output type is available, and the exported
data is then customized to meet the Olex requirements.
Once an output type has been defined, it is listed in the
side of the page. To remove or edit an output type, select it in the
Select to change the settings. Select
Edit
Note
You can not define the communication port parameters here. If you need to adjust these,
you must select
I/O Setup
page is located in the
Setup
406273/C
dialog box. The
Output
Remove
after you have defined the data output parameters. The
and
Installation Output
Functions and dialog boxes
to keep the changes.
Save
dialog box.
Output
dialog box is located on
Output
Installed Outputs
Installed Outputs
to delete the output.
dialog boxes.
box on the left
box.
I/O
397