Simrad ES80 Reference Manual page 321

Note
Frequency modulated (FM) transmission is an optional function. In order to use this
functionality, a dedicated software license is required. Contact you local dealer for
more information.
Some of the information provided in the
dialog box.
Operation
Details
Channel
This column identifies the channel. In this context, the phrase channel is used as a
common term to identify the combination of transceiver, transducer and operating
frequency. The text string provides the following information:
• Transducer name
• Transducer serial number
Pulse Type
You use
Pulse Type
CW or FM. "CW" means "continuous wave", while "FM" means "frequency
modulated".
In order to use the frequency sweep ("chirp") functionality, you must use frequency
modulated (FM) pulses. You must also use a transducer that supports the frequency
range.
Note
Frequency modulated (FM) transmission is an optional function. In order to use
this functionality, a dedicated software license is required. Contact you local
dealer for more information.
Mode
This column specifies the current transceiver mode. You can manually select the
mode that suits your current operation.
The following modes are available:
•
Active
The transmitter and receiver are both active. This is the normal mode for
operation.
406273/C
Extras
to select which type of pulse transmission you want to use;
Functions and dialog boxes
menu reflects the settings in the
Normal
319