Simrad ES80 Reference Manual page 425

•
Biomass
This is an "on/off" switch. Select the box to enable the function. This function
writes an extra thick and brightly coloured curve on the echogram. The
Biomass Line shows you the measured biomass for each individual ping. You
can change the scale of the curve to fit the vertical space available on the
echogram.
Note
This is an optional function. In order to use this functionality, a dedicated
software license is required. Contact you local dealer for more information.
Scale
When enabled, equidistant horizontal scale lines are drawn inside the echogram
in the current foreground colour; black during day and white during night. A
maximum of 10 scale lines can be selected. No scale lines are drawn when the
scale line count is set to 0 (zero).
Vertical
These options control vertical markers and annotations.
•
Ticks
This function places short vertical markers on the top of the echogram. These
lines are used to measure time or distance.
– : No vertical markers are shown.
None
– : A short vertical line is drawn in the upper part of the echogram once
Time
every specified number of minutes.
– : A short vertical line is drawn in the upper part of the echogram
Distance
once every specified number of 1/10 nautical miles.
•
Annotations
Select Text or Line to allow Annotation markers to be shown in the echogram.
If you select Line, each text annotation is followed by a vertical line for
improved visibility. Annotations can be typed in manually, set up for automatic
generation, or imported from an external device.
Tip
Use the
Annotations
the echograms. Several different annotation types may be added to the
echogram. The
For more information:
When you save raw data, the annotations you have defined are stored as
annotation datagrams.
406273/C
page to type comments and insert annotations into
page is located in the
Annotations
Annotations page, page 382
Functions and dialog boxes
dialog box.
Installation
423