Simrad ES80 Reference Manual page 355

Return to...
Installation dialog box, page 346
Related tasks
Installing transceiver channels, page 201
Installing GPT transceiver channels, page 203
Disconnecting transceiver channels, page 205
Related dialog boxes
BITE (Built-In Test Equipment) dialog box, page 400
BITE: Transceiver page, page 405
Topics
Transceiver Installation page, page 353
Transceiver IP Address page, page 360
Transceiver Installation page
The
Transceiver Installation
transceivers. Every time the page is opened, the ES80 software automatically performs
a search on the Ethernet network for transceivers. An overview of the available
transceivers is shown. As permitted by the software license, you can assign any
transducer to any Wide Band Transceiver (WBT).
Description
The
Transceiver Installation
•
Frequency Channels
The list in the upper part on the
of the transceivers and channels that are currently available. In this context, the
phrase channel is used as a common term to identify the combination of transceiver,
transducer and operating frequency. Each channel is identified by the transceiver type
and serial number and the transducer(s) in use. The current status for each channel is
also provided. If you have many transceivers connected you can change the size of
the dialog box, or you can use the two arrows on the right hand side of
Installation
the list to scroll up and down.
406273/C
parameters control the installation and disconnection of
page uses these groups to collect the parameters.
Transceiver Installation
Functions and dialog boxes
page shows you an overview
353