Transducer Installation Page - Simrad ES80 Reference Manual

Simrad ES80 Reference Manual
•
Synchronization
The purpose of the
or as a master or slave in a synchronized system. Synchronization is required in order
to avoid interference if the ES80 is used simultaneously with other hydroacoustic
instruments within the same frequency range.
Synchronization page, page 375
•
Units
The ES80 user interface presents many measurements. These measurements are for
example related to depth, range or distance. The choices on the
to control which units of measurements that are used.
Units page, page 378
•
Trawl
When you use a trawl, the ES80 can draw the upper and lower trawl lines in the
echogram. In order to this, the ES80 needs to know the relevant trawl parameters.
If your trawl system is connected to the ES80, these parameters are automatically
available. If the trawl system is not connected, the
the parameters manually.
Trawl page, page 380
•
Annotations
When you study an echogram, it is often useful to add personal comments to it.
Comments can be used to identify specific events such as specific echoes, unusual
bottom conditions, or simply for keeping track of time or distance. The
choices allow you to type comments and annotations into the echograms. The
comments are automatically saved when you enable raw data recording.
Annotations page, page 382
•
Software License
The ES80 needs one or more software licenses to work. Each software license code
"unlocks" one Wide Band Transceiver (WBT) for operational use with a set of
predefined properties. The
(text string) to unlock the ES80 functionality.
Software License page, page 384

Transducer Installation page

The transducers you wish to use with the ES80 must be "installed" as a part of the
software configuration. Which transducers to use depends on the number of transceivers
in your system, and the licenses you have for these. Unless you replace a broken
transducer, or add a new, you only need to do this once.
Prerequisites
The dialog box is not available when your ES80 is set to Replay mode.
Installation
348
parameters is to set up the ES80 to operate alone,
Synchronization
Software License
Units
options allow you to define
Trawl
settings allow you to type a license code
page allow you
Annotations
406273/C