Simrad ES80 Reference Manual page 258

Simrad ES80 Reference Manual
Selecting echogram views on the bottom bar
The number of tabs available on the bottom bar depends on how many channels your
ES80 has. Two tab "groups" allow you to select channels and views. This example shows
the ES80 with two channels. In this context, the phrase channel is used as a common
term to identify the combination of transceiver, transducer and operating frequency.
A
Presentation modes
Three presentation modes are available when you wish to see all the echogram
channels simultaneously in the ES80 presentation. The three tabs will arrange the
echogram views vertically, horizontally, or in rectangular rows and columns.
By default, the echogram views are automatically arranged in the ES80 presentation.
You can click and drag the border of each individual view to change its size. The
size of the other views are reduced accordingly.
B
Selecting individual echogram channels
Each channel is shown with a dedicated tab. The channel is identified with the
name of the transducer in use. This name is the custom name you provided when
you installed the transducer. Select a specific transducer tab to see only that channel
in the ES80 presentation.
Selecting which echogram type to use
Once one or more echogram views are open, you can
choose which echogram type to see.
Click once in the echogram view that you wish to change. This will make the view
"active". A thick border is placed on the selected view to visualize this. Open the
menu, click
Active Echogram
page.
Echogram
In each echogram view, you can also select from a number of markers, lines and
annotations to enhance the echogram, or to provide additional information. These can be
selected on the
Lines
Related dialog boxes
Echogram dialog box, page 419
Echogram: Echogram page, page 424
256
to open the dialog box, and select
page in the
Echogram
Echogram Type
dialog box.
on the
406273/C