Simrad ES80 Reference Manual page 112

Simrad ES80 Reference Manual
• If you choose Interval, you must define the time between each "ping" with the
function.
Interval
• If you choose Maximum, the ES80 will transmit ("ping") as often as possible.
Procedure
1 Open the
Operation
2 On the
Operation
• Select the right symbol to start "pinging".
• Select the left symbol to stop "pinging".
• Select the middle of the button to open the button menu.
3 Set to Maximum.
Ping Mode
This will make the ES80 ping with maximum ping rate ("speed"). The time between
each ping ("ping rate") depends mainly on the current range. In some systems, a
low performance Processor Unit and/or a slow hard disk may reduce the ping rate.
How fast your Processor Unit communicates with external peripherals may also
have an effect on the ping rate.
4 Set to Interval.
Ping Mode
5 Specify the interval between each "ping".
a Select either side (+ or –) of the
time between each "ping".
b Select
Ping Interval
Select either side of the button to choose a value. Select the middle of the
button to open it. If you have a keyboard connected to the ES80, you can type
the requested value into the text box.
You can also change the value by selecting - and holding - the middle of the
button, and move the cursor sideways. Move the cursor towards left to reduce
the value, or towards right to increase the value. Release the mouse button
when the requested value is shown in the button.
6 Set to Single Ping.
Ping Mode
7 Select the "ping" symbol on the right side of the
"ping".
110
menu.
menu, set to On.
Ping
Ping Interval
to open it, and type the requested time between each "ping".
button to select the requested
button to transmit one single
Ping
Ping
406273/C