Removing The Es80 Operational Software - Simrad ES80 Reference Manual

Procedure
1 Read the software release note to see if special actions are required.
The software release note can be downloaded from our website.
• https://www.simrad.com
2 Turn on the Processor Unit.
3 Switch off any firewall applications.
4 Insert the ES80 software media.
If the ES80 software is provided on a CD or DVD, and your Processor Unit is not
fitted with a suitable drive, copy the files to a USB flash drive.
5 Use a file manager application on the Processor Unit to access the software files.
6 Double-click
Setup.exe
Note
If the operating system on your computer is not supported, the installation will
stop with an error message. You must then upgrade your computer - or use a
different one - to complete the software installation. The ES80 supports Microsoft
Windows ® 7 SP1 (v6.1.7601) and later.
7 Allow the installation wizard to run. Follow the instructions provided.
We recommend that you install the software in the default folder suggested by
the wizard.
In the last dialog box you are permitted to remove old settings. Read the options
carefully. Do not remove any existing settings unless this is your intention.
8 Once the software installation has been completed, double-click the icon on the
desktop to start the program.
Further requirements
Certain software upgrades for the ES80 also include an upgrade for the Wide Band
Transceiver (WBT). To ensure maximum operational performance, these software
versions must always be compatible.

Removing the ES80 operational software

If you wish to replace your Processor Unit with a new unit, or simply do not wish to use
the ES80 any longer, you can remove the software.
Prerequisites
This procedure is made for the Microsoft
that you are familiar with this operating system. Operation in Microsoft
10 is very similar.
406273/C
to start the installation.
®
Windows
Operating procedures
®
7 operating system. It is assumed
®
®
Windows ®
195