Selecting Replay Mode - Simrad ES80 Reference Manual

Note
Note that Inactive operating mode is not the same as Passive mode. While Inactive
mode stops both transmission and reception, Passive mode will still allow the ES80
to receive echoes.
To select Passive mode, use the
Procedure
1 Open the
Operation
2 Select
Operation
Result
When the ES80 has been disabled using this function, it will stop. The transmission
("pinging") stops.The current echoes will be removed from the presentation.
Related topics
Operation function, page 315

Selecting Replay mode

The Replay mode allows you to play back previously recorded raw data. The ES80 is not
operational while in Replay mode. Neither transmission nor reception takes place.
Context
All playback is controlled by the replay bar.
: Select this button to stop the playback.
A
Stop
: Select this button to start the playback, or to pause it.
B
Play/Pause
C : Select this slider and move it sideways to adjust the replay speed.
Replay speed
: This button shows which file you are currently playing.
D
Replay file
: This bar shows you the replay progress of the current file.
E
Progress
Procedure
1 Open the
Operation
406273/C
Normal Operation
menu.
, and set it to Inactive.
menu.
Operating procedures
dialog box.
83