Disabling The Automatic Echogram History Recording - Simrad ES80 Reference Manual

Simrad ES80 Reference Manual
Every time the History file is saved to the hard disk, the pinging may be interrupted. It
is therefore possible to disable the History function. This function is located on the
page in the
File Setup
Procedure
1 Click in any echogram view to make it "active".
The data in the information pane is only valid for the selected channel. The "active"
echogram view is identified with a thicker border.
2 On the top bar, select
In order to show you the recorded echograms, the echogram presentation is split
in two. The right side will show you the active echogram, while the left side is
used to display the recorded history. Move the slider button at the bottom of the
presentation to view the full extent of the image.
3 Select one more time to close the function.
History

Disabling the automatic echogram history recording

The History function saves the echogram images automatically on the Processor Unit
hard disk Every time the History file is saved to the hard disk, the pinging may be
interrupted. It is therefore possible to disable the History function.
Context
The History information pane allows you to view previously recorded echogram
sequences. These images can be recalled using the History information pane. The
information in the History presentation is the same as on the original echogram
presentation.
Procedure
1 Open the
Setup
2 Select .
Output
Observe that the
pages selected by the menu on the left side.
3 On the left side of the
128
dialog box.
Output
.
History
menu.
dialog box opens. This dialog box contains a number of
Output
dialog box, select
Output
to open the page.
File Setup
406273/C