Simrad Psimp-F Datagram Format - Simrad ES80 Reference Manual

Simrad ES80 Reference Manual
19 : Checksum
chksum
The checksum field consists of a "*" and two hex digits representing the exclusive
OR of all characters between, but not including, the "$" and "*" characters
Note
This datagram format is obsolete, and it is no longer in use on new designs. It has
been replaced by datagram PSIMP-D1.
Related topics
Proprietary datagram formats, page 504
Sensor Installation page, page 363
Sensor Configuration page, page 369
Relay Output page, page 395
Interface specifications, page 473

Simrad PSIMP-F datagram format

Simrad PSIMP-F is a proprietary datagram format created by Kongsberg Maritime
to provide the type and configuration of PS and PI sensors used by a Simrad catch
monitoring system.
Format
$PSIMP,F,S1,S2,S3,T1,T2,T3,F1,F2,F3*chksum<CR><LF>
Description
Note
This datagram description is not complete. If you need further information, contact
Kongsberg Maritime.
1 : Talker identifier
PS
2 : Datagram identifier
IMP
3 : Sentence specifier
F
4 : sensor types
S1,S2,S3
• : Depth 300 m
D
• : Depth 600 m
E
• : Temperature
T
• : Catch slow
C
• : Catch fast
F
510
406273/C