Huawei Quidway S8500 Series Command Manual page 5

This module details the commands for the configuration on network protocols,
including those for IP address, ARP, DHCP, DNS and IP performance
configuration.
Routing Protocol
This module concentrates on the commands for the configuration on routing
protocols, including those for static routing, RIP, OSPF, IS-IS, BGP and routing
policy configuration.
Multicast Protocol
This module presents the commands for the configuration on multicast protocols,
including those for IGMP Snooping, IGMP multicast VLAN, PIM-DM, PIM-SM,
MSDP and MBGP multicast extension configuration.
QoS/ACL
This module introduces the commands for QoS/ACL configuration.
MPLS
This module introduces the commands for MPLS and BGP/MPLS VPN
configuration.
STP
This module introduces the commands for STP configuration.
Security
This module presents the commands for the configuration on 802.1x, AAA and
RADIUS protocols, HABP, and HWTACACS protocol.
Reliability
This module focuses on the commands for VRRP and HA configuration.
System Management
This module details the commands for the configuration involved in system
management and maintenance, including those for file management, system
management, SNMP, RMON, NTP protocol, SSH terminal services and network
management configuration.
PoE
This module introduces the commands for remote power-feeding configuration.
NAT&URPF&VPLS
This module details the commands for NAT, URPF, VPLS configurations.
Integrated Management
This module details the commands for HGMP V1 configuration.
Appendix
This appendix offers an index for all the commands available in the S8500 series.
Huawei Technologies Proprietary