Table of Contents
Advertisement
| Basic Administration Protocols
C
14
HAPTER
Simple Network Management Protocol
Table 34: Supported Notification Messages (Continued)
Model
autoUpgradeTrap
swCpuUtiRisingNotification
swCpuUtiFallingNotification
swMemoryUtiRisingThreshold
Notification
swMemoryUtiFallingThreshold
Notification
dhcpRougeServerAttackTrap
macNotificationTrap
lbdDetectionTrap
lbdRecoveryTrap
sfpThresholdAlarmWarnTrap
syncEReceiveSSMTrap
syncEClockSource
userAuthenticationFailureTrap
userAuthenticationSuccessTrap
loginTrap
logoutTrap
swAlarmInputRecover
fileCopyTrap
* These are legacy notifications and therefore must be enabled in conjunction with the corresponding traps on the SNMP
Configuration menu.
† The MIB OID for ECS4660-28F is 1.3.6.1.4.1.259.10.1.10.
Level
1.3.6.1.4.1.259.10.1.10.2.1.0.104
1.3.6.1.4.1.259.10.1.10.2.1.0.107
1.3.6.1.4.1.259.10.1.10.2.1.0.108
1.3.6.1.4.1.259.10.1.10.2.1.0.109
1.3.6.1.4.1.259.10.1.10.2.1.0.110
1.3.6.1.4.1.259.10.1.10.2.1.0.114
1.3.6.1.4.1.259.10.1.10.2.1.0.138
1.3.6.1.4.1.259.10.1.10.2.1.0.141
1.3.6.1.4.1.259.10.1.10.2.1.0.142
1.3.6.1.4.1.259.10.1.10.2.1.0.189
1.3.6.1.4.1.259.10.1.10.2.1.0.196
1.3.6.1.4.1.259.10.1.10.2.1.0.197
1.3.6.1.4.1.259.10.1.10.2.1.0.199
1.3.6.1.4.1.259.10.1.10.2.1.0.200
1.3.6.1.4.1.259.10.1.10.2.1.0.201
1.3.6.1.4.1.259.10.1.10.2.1.0.202
1.3.6.1.4.1.259.10.1.10.2.1.0.203
1.3.6.1.4.1.259.10.1.10.2.1.0.208
– 492 –
Group
This trap is sent when auto upgrade is executed.
This notification indicates that the CPU utilization
has risen from cpuUtiFallingThreshold to
cpuUtiRisingThreshold.
This notification indicates that the CPU utilization
has fallen from cpuUtiRisingThreshold to
cpuUtiFallingThreshold.
This notification indicates that the memory
utilization has risen from
memoryUtiFallingThreshold to
memoryUtiRisingThreshold.
This notification indicates that the memory
utilization has fallen from
memoryUtiRisingThreshold to
memoryUtiFallingThreshold.
This trap is sent when receiving a DHCP packet
from a rouge server.
This trap is sent when there are changes of the
dynamic MAC addresses on the switch.
This trap is sent when a loopback condition is
detected by LBD.
This trap is sent when a recovery is done by LBD.
This trap is sent when the sfp's A/D quantity is
not within alarm/warning thresholds.
This trap is sent when a port received SSM
messages
This trap is sent when a port becomes clock
source port
This trap will be triggered if authentication fails.
This trap will be triggered if authentication is
successful.
This trap is sent when user logs in.
This trap is sent when user logs out.
This trap is fired when the alarm input event has
been recovered.
This trap is sent when file copy is executed.
If the copy action is triggered by system, the
login user information(trapVarLoginUserName/
trapVarSessionType/
trapVarLoginInetAddressTypes/
trapVarLoginInetAddres) will be null value.
Advertisement
Chapters
Table of Contents
