Edge-Core ECS4660-28F Management Manual page 493

W I
EB NTERFACE
To configure an SNMP group:
Click Administration, SNMP.
1.
Select Configure Group from the Step list.
2.
Select Add from the Action list.
3.
Enter a group name, assign a security model and level, and then select
4.
read, write, and notify views.
Click Apply
5.
Figure 260: Creating an SNMP Group
To show SNMP groups:
Click Administration, SNMP.
1.
Select Configure Group from the Step list.
2.
Select Show from the Action list.
3.
Figure 261: Showing SNMP Groups
– 493 –
| Basic Administration Protocols
C 14
HAPTER
Simple Network Management Protocol