Table of Contents
Advertisement
the other items and described under
Civic-Address."
ECS ELIN – Emergency Call Service Emergency Location
■
Identification Number supports traditional PSAP-based Emergency
Call Service in North America.
Country Code – The two-letter ISO 3166 country code in capital ASCII
◆
letters. (Example: DK, DE or US)
What – The type of device to which the location applies as described
◆
for the field entry "Device entry refers to" under
LLDP Interface
Attributes."
Port Details – Extended Power-via-MDI
Power Type – Power Sourcing Entity (PSE) or Power Device (PD).
◆
Power Priority – Shows power priority for a port. (Unknown, Low,
◆
High, Critical)
Power Source – Shows information based on the type of device:
◆
PD – Unknown, PSE, Local, PSE and Local
■
PSE – Unknown, Primary Power Source, Backup Power Source -
■
Power conservation mode
Power Value – The total power in watts required by a PD device from
◆
a PSE device, or the total power a PSE device is capable of sourcing
over a maximum length cable based on its current configuration. This
parameter supports a maximum power required or available value of
102.3 Watts to allow for future expansion. (Range: 0 - 102.3 Watts)
Port Details – Inventory
Hardware Revision – The hardware revision of the end-point device.
◆
Software Revision – The software revision of the end-point device.
◆
Manufacture Name – The manufacturer of the end-point device.
◆
Asset ID – The asset identifier of the end-point device. End-point
◆
devices are typically assigned asset identifiers to facilitate inventory
management and assets tracking.
Firmware Revision – The firmware revision of the end-point device.
◆
Serial Number – The serial number of the end-point device.
◆
Model Name – The model name of the end-point device.
◆
– 475 –
| Basic Administration Protocols
C
14
HAPTER
"Configuring LLDP Interface
6
Link Layer Discovery Protocol
"Configuring
Advertisement
Chapters
Table of Contents
