Table of Contents
Advertisement
BECKHOFF
4
Handling
4.1
Transport
l
l
l
l
l
l
4.2
Packaging
l
l
4.3
Storage
l
l
l
l
l
l
4.4
Maintenance / Cleaning
l
l
l
l
l
4.5
Disposal
In accordance to the WEEE-2002/96/EG-Guidelines we take old devices and accessories back for
professional disposal, if the transport costs are taken over by the sender. Send the devices to:
Beckhoff Automation GmbH
Eiserstrasse 5
D-33415 Verl
Servomotors AM3000
Climate category
Transport temperature
Transport humidity
Only by qualified personnel in the manufacturer's original recyclable packaging
Avoid shocks, especially to the shaft end
If the packaging is damaged, check the motor for visible damage. Inform the carrier and, if
appropriate, the manufacturer.
Cardboard packing with Instapak
You can return the plastic portion to the supplier or a certified disposal company (see "Dis-
posal").
Motor type
Carton
AM301
X
AM302
X
AM303
X
AM304
X
Climate category
Storage temperature -
Humidity
Store only in the manufacturer's original recyclable packaging
Max. stacking height
Storage time
Maintenance and cleaning only by qualified personnel
The ball bearings have a grease packing which is adequate for 20,000 hours of operation
under normal conditions. The bearings should be replaced after 20,000 hours of operation
under rated conditions.
Check the motor for bearing noise every 2500 operating hours, respectively each year. If any
noises are heard, then the operation of the motor must stop, the bearings must be replaced.
Opening the motor invalidates the warranty.
If the housing is dirty, clean housing with Isopropanol or similar, do not immerse or spray
06/2008
2K3 to EN 50178
-25...+70°C, max. 20K/hr change
rel. humidity 5% - 95% , no condensation
®
foam cushion.
Max.stacking height
Motor type
10
10
6
6
1K4 to EN 50178
25...+55°C, max. variation 20K/hr.
rel. humidity 5% - 95%, no condensation
see table under Packaging
unlimited
Carton
Max.stacking height
AM305
X
AM306
X
AM307
X
Handling
5
1
1
9
Advertisement
Table of Contents
