Terminal Points - Axis Modules; Motor- Feedback Connection (X13 And X23) Ax8108, Ax8118 And Ax8206; Digital Inputs (X15 And X25) - Beckhoff AX8000 System Manual

9.5

Terminal points - axis modules

9.5.1 Motor- feedback connection (X13 and X23) AX8108, AX8118
and AX8206
For two-channel axis modules this hybrid motor connector is required for both channel "A" and channel "B"; it
is part of pre-assembled Beckhoff motor cables.
View
*) Digital: KTY 83-1xx or KTY 84-1xx
Brake current
The max. output current for the motor brake (B– and B+) is:
1 A for AX8108 and AX8206
Note
2 A for AX8118
9.5.2

Digital inputs (X15 and X25)

For two-channel axis modules this plug connector is required both for channel "A" and for channel "B".
View Terminal
point
Safety-related documentation!
Axis modules with the order designation AX8xx-x1xx support the
safety functions STO (Safe Torque Off) and SS1 (Safe Stop 1).
Attention
Before putting the axis module into operation, read the documentation for:
• AX8911 - TwinSAFE Drive option for AX8000 series servo drives.
AX8000 - system manual
All manuals and user guides at all-guides.com
Terminal point Connection
PE Protective conductor
U Motor connection U
V Motor connection V
W Motor connection W
T - OCT – and temp. -
T + OCT + and temp. +
*)
B - Motor brake GND
B + Motor brake +
Connection Max.
AX8xxx-x0xx wire cross-sec-
tion
1 Dig. input 1
(20 µs)
2 Dig. input 2
(20 µs)
with wire end
3 Dig. input 3
sleeve
(8 µs)
according to DIN
46 228/1
4 Dig. input 4
max. 1.5 mm²
(8 µs)
(AWG 16)
Version: 1.0
Electrical installation
Max. wire
cross-section
2
*) 6 mm (AWG 8) push in
Connection Max.
AX8xxx-x1xx wire cross-sec-
tion
Dig. safety input 1
(20 µs)
Dig. safety input 2
(20 µs)
with wire end
Dig. input 3
sleeve and collar
(8 µs)
according to DIN
46 228/4
Dig. input 4
max. 1 mm 2
(8 µs)
(AWG 17)
Tightening
torque
Tighten-
ing torque
push in
53