BECKHOFF
1
General
1.1
About this manual
This manual describes the AM3000 series of synchronous servomotors (standard version). Among
other things, you find information about:
The motors are operated in drive systems together with BECKHOFF servo amplifiers. Please
observe the entire system documentation, consisting of:
— Product manual for the servo amplifier
— Installation and setup instructions for any expansion card which is connected
— Online help of the amplifier's setup software
— Accessories manual
— Technical description of the AM3000 series of motors
1.2
Target group
This manual addresses personnel with the following qualifications:
Transport :
Mech. Installation :
Electr. Installation : only by electrically qualified personnel.
Setup :
The qualified personnel must know and observe the following standards:
The operator must ensure that the safety instructions in this manual are followed. The ope-
rator must ensure that all personnel responsible for working with the motor have read and
understood the product manual.
1.3
Symbols used
1.4
Abbreviations used
see chapter 10.1 "Definition of Terms".
Servomotors AM3000
only by personnel with knowledge of handling electrostatically
sensitive components.
only by mechanically qualified personnel.
only by qualified personnel with extensive knowledge of electrical
engineering and drive technology
IEC 60364 or DIN VDE 0100
IEC 60664 or DIN VDE 0110
national accident prevention regulations or BGV A3
Danger to personnel from electricity
and its effects
Þ
see page/chapter (cross reference)
06/2008
General warning
general instruction
mechanical hazard
l
special emphasis
General
5