Access Point Diagnostics; Functionality - ABB REL650 Technical Manual

1MRK 506 382-UEN A
Name Values (Range)
DNP3
SNTPServer
FSTAccess
C37.118TCP
C37.118UDP1
C37.118UDP2
C37.118UDP3
C37.118UDP4
C37.118UDP5
C37.118UDP6
DefaultGateway
Table 466: DHCP Non group settings (basic)
Name Values (Range)
DHCPServer
16.2
16.2.1
Line distance protection REL650 2.2 IEC
Technical manual
Unit
Off -
On
Off -
On
Off -
On
Off -
On
Off -
On
Off -
On
Off -
On
Off -
On
Off -
On
Off -
On
0 - 18 IP
Address
Unit
Off -
On

Access point diagnostics

Functionality

The access point diagnostics function blocks (RCHLCCH, SCHLCCH and
FRONTSTATUS) supervise communication. SCHLCCH is used for
communication over the rear Ethernet ports, RCHLCCH is used for redundant
communications over the rear Ethernet ports and FRONTSTATUS is used for
communication over the front port. All access point function blocks include output
signal for denial of service.
Step Default
- On
- On
- On
- On
- On
- On
- On
- On
- On
- On
1 0.0.0.0
Step Default
- Off
Section 16
Ethernet
Description
DNP3 slave
SNTP Server
Field Service Tool access
IEEE 1344 and C37.118 TCP server
IEEE 1344 and C37.118 UDP stream
and the TCP control server
IEEE 1344 and C37.118 UDP stream
and the TCP control server
IEEE 1344 and C37.118 UDP stream
and the TCP control server
IEEE 1344 and C37.118 UDP stream
and the TCP control server
IEEE 1344 and C37.118 UDP stream
and the TCP control server
IEEE 1344 and C37.118 UDP stream
and the TCP control server
Default gateway IP address
Description
Access point front DHCP server
operation
GUID-20F64A6D-AA8C-47D7-AA7D-4810996B2FF2 v1
PID-6811-SETTINGS v3
657