Table of Contents
Advertisement
Drive
￭
SMT function
When the FPTC-02 module is delivered as an add-on kit, the package contains a sticker
to show the ATEX/UKEX classification of the Safe motor temperature (SMT) function.
The user must attach this sticker near the type designation label of the drive/inverter
to ensure the ATEX/UKEX compliance of the safety circuit.
In the factory-installed options, this sticker is already attached to the drive/inverter
module at the factory.
In the cabinet-built drives, this sticker is attached to the cabinet door at the factory.
1
2
1
CE marking with Notified Body identification: The manufacturer declares that the product conforms
with ATEX Product Directive 2014/34/EU.
Notified Body: Eurofins Expert Services
2
UKCA marking with Approved Body identification: The manufacturer declares that the product
conforms with The Equipment and Protective Systems Intended for Use in Potentially Explosive
Atmospheres Regulations 2016 (+ amendment SI 2019 No. 696).
Approved Body: Eurofins E&E CML Limited
3
Specific marking of explosion protection
4
Equipment group II: Product for surface industry (other than mining applications)
5
Equipment category 2. Parentheses show that the drive (or inverter unit) must be installed outside
the potentially explosive atmosphere.
6
Certified for use in explosive atmospheres caused by:
G = gases, vapors or mists, D = dust.
7
Certificate references
Option +Q971
When the FPTC-02 module is ordered as a factory-installed option, some products
have an additional sticker attached to the drive/inverter module to signify ATEX/UKEX
classification of the Safe disconnection function (option +Q971). This sticker and the
ATEX/UKEX certification reference are not mandatory with the FPTC-02 module.
3
4
Hardware description 19
5
6
3AXD50000003122 E
7
Advertisement
Table of Contents
