Configure The 1444 Dynamic - Allen-Bradley 1444-TSCX02-02RB User Manual

Configure the 1444 Dynamic 
Measurement Module
This chapter details how to define and configure the 1444 dynamic
measurement module and set associated parameters.
Topic
General Page
Module Definition
Internet Protocol Page
Port Configuration Page
Time Sync Page
Hardware Configuration Page
Time Slot Multiplier Page
Speed Page
IMPORTANT Many parameters within the AOP are named differently than the objects
within the module that they refer to. Consequently, some parameter names
that are listed in the CIP™ Objects Library
match the parameters that are presented on the AOP.
See the cross-reference at the beginning of the CIP Objects Library to
determine the specific names of parameters as presented on the AOP, stored
in the configuration assembly, and held in the various objects in the module.
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
3
Chapter
Page
92
92
109
110
110
111
118
121
(CIP Objects on page 317), do not
91