Applications - Allen-Bradley 1444-TSCX02-02RB User Manual

1
Chapter
About the Dynamix 1444 Series Dynamic
Measurement Module

Applications

The Dynamix™ 1444 Series dynamic measurement module is a four-channel,
general-purpose monitor that can serve almost any industrial machinery
protection or application that monitors condition. The module supports
measurements of dynamic inputs such as vibration, pressure, and static inputs
such as thrust, eccentricity, and rod drop. The module is used to monitor shaft,
casing, and pedestal vibration, shaft and rod position, expansion of the casing,
and other critical dynamic and position measurements on machinery that
rotates.
To achieve this degree of adaptability, the module marries an extraordinarily
flexible firmware and an incredibly powerful multi-processor hardware
platform.
The 1444-DYN04-01RA module is designed specifically for integration with
Allen-Bradley® Logix controllers that are connected across an industrial
Ethernet network. This design makes the 1444 Series unequaled in its ability
to serve as a synergetic member of larger total facility control and information
management systems.
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018 13