Allen-Bradley 1444-TSCX02-02RB User Manual page 102

Chapter 3 Configure the 1444 Dynamic Measurement Module
Table 15 - Module Functionality
Parameter Values
Ch0, Ch1, Ch2, 0: Off
Ch3
1: Dynamic
2: gSE
3: Static
102
Comment
Channel Type is a high-level selection that is used by the AOP (not the module) to
filter / manage further user selections in Module Definition and in Configuration.
The Channel Types that are enabled are based on the Module Personality selected.
The selections are as follows.
Personality
Real Time, 4 Ch –
Dynamic (4 kHz)
or Static
Real Time, 2 Ch –
Dynamic
(20 kHz), 2 Ch
Static
Real Time, 4 Ch –
Dynamic (4 kHz)
– Dual Path
Real Time, 2 Ch –
Dynamic (40 kHz)
Multiplexed, 4 Ch
– Dynamic
(40 kHz) or Static
– Paired
Multiplexed, 4 Ch
– Dynamic
(40 kHz) or Static
– Individual
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Ch0 Ch1 Ch2
Off, Off, Off,
Dynamic, Dynamic, Dynamic,
Static Static Static
Off, Dynamic Off, Off,
Ch0 Setting Static
Off, Off, Off,
Dynamic, Ch0 Setting Dynamic,
Static Static
Off, Off, Off
Dynamic, Ch0 Setting
gSE
Off, Off, Off,
Dynamic, Ch0 Setting Dynamic,
gSE, gSE,
Static Static
Off, Off, Off,
Dynamic, Dynamic, Dynamic,
gSE, gSE, gSE,
Static Static Static
Ch3
Off,
Dynamic,
Static
Off,
Static
Off,
Ch2 Setting
Off
Off,
Ch2 Setting
Off,
Dynamic,
gSE,
Static