Measurement Id Definition - Allen-Bradley 1444-TSCX02-02RB User Manual

Page Parameter
Analog Output Measurement
Measurement Alarm Measurement
Page Parameter
Trend Data-Set Definition
Transient Data-Set Definition
*See Measurement ID Definition on page 325
StaticParams and DiscreteParams attributes.

Measurement ID Definition

Throughout the configuration, there are several parameters that are used to
either indicate a specific measurement, or that indicate some set of
measurements.
Measurement IDs (INT values) and Parameter Arrays (DINT[4]) refer to the
parameters shown
or multiple (Parameter Array) data values that are used in the control.
Examples
• Measurement ID: On the Analog Output page, four Measurement IDs
are defined, one per channel, which specify the parameter to output on
the channel. In these cases, the INT refers to the Index in the table to
point to the measurement that is output.
• Parameter Array: On the Trend Page, four StaticParams attributes are
defined, each is a DINT value. In this case, the specific bits that are set in
the 4 DINTs define which measurements are included in the discrete
data for the Trend.
The configuration includes the following Measurement ID parameters.
Table 84 - Measurement ID Parameters
Tag Member
Ch0...3AnalogOut.MeasurementID
MeasAlarm00...23.ID
The configuration includes the following Parameter Array parameters.
Table 85 - Parameter Array Parameters
Tag Member
Trend.StaticParams0...3
Trend.DiscreteParams0...3
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
inTable 84 and Table 85. These parameters define one (ID)
Object
Dynamix Current Output Module Object Current Output Measurement Identifier
Dynamix Measurement Alarm Object
Object
Dynamix Data Manager Object
Dynamix Data Manager Object
CIP Objects
to interpret the contents of the
Attribute
Alarm Measurement Identifier
Attribute
DWORD 0...3
DWORD 0...3
Appendix A
325