Allen-Bradley 1444-TSCX02-02RB User Manual page 440

Appendix A CIP Objects
Table 173 - Instance Attributes
Attribute ID Access Rule NV
1 Get V
2 Get V
Sensor Type Configuration
16 Get V
17 Get V
24 Get V
25 Get V
Trigger Configuration
32 Get V
33 Get V
34 Get V
Sensor OK Detection
40 Get V
41 Get V
42 Get V
43 Get V
44 Get V
TSC Output Configuration
48 Get V
49 Get V
440
NV status relates to nonvolatile storage in the auxiliary module, not in the
main module.
Name Data Type
TSC Measured Speed Output REAL
Individual Transducer Status BYTE
Group of four configuration attributes.
Input Sensor Type USINT
Input Name SINT[32]
Sensor Power Supply SINT
Sensor Target, INT
Pulses Per Rev
Group of three configuration attributes.
Trigger Mode SINT
Trigger Threshold INT
Trigger Slope/Edge SINT
Group of 5 configuration attributes.
Sensor OK Definition BYTE
Sensor OK High Threshold INT
Sensor OK Low Threshold INT
High RPM Threshold REAL
Low RPM Threshold REAL
Group of 2 configuration attributes.
Tacho Bus and TSCX terminal SINT
connections, output 0
TSCX terminal connections, SINT
output 1
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Description of Attribute
Actual Speed considering number of
pulses per revolution.
Individual transducer-operating
status information.
Definition of input source that
configures required inputs and
signal conditioning.
Physical channel name identifier.
Bit-coded configuration for tacho
power supply configuration.
The number of signal pulses per
revolution of the shaft.
Potential support for auto threshold
detection on the TSC module.
Trigger detection threshold voltage
that is specified in mV
Definition of trigger detection slope. 0: Positive
TX OK Definition that drives the
appropriate OK line of the tacho bus.
High-voltage threshold for the
Sensor OK monitoring window.
Low voltage threshold for the Sensor
OK monitoring window
High RPM Threshold for the Sensor
OK monitoring window.
Low RPM Threshold for the Sensor
OK monitoring window.
Define processed signal type to be
output on the Tacho bus and
terminal output 0.
Define processed signal type to be
output via terminal interface.
Semantics of Values
RPM
Selection options
32 characters
TX power supply options
1...255
0: Configured threshold
1: Auto detection
(when implemented)
Range: -23000...23000
(+23V)
1: Negative
Configuration options
mV
Range: -24000...24000
mV
Range: -24000...24000
RPM
Range: 50...30000
RPM
Range: 0.5...29000
0: 1/rev signal
1: multi-pulse (raw) signal
Fixed at 0.
0: 1/rev signal
1: multi-pulse (raw) signal
Fixed at 0.