Allen-Bradley 1444-TSCX02-02RB User Manual page 523

Table 278 - Relay Expansion Module 2 / Expansion Module Communications Status
Bit Description (Expansion Relay Module 2) Bit
0 Relay module not responding. If set
disregard other bits in this group.
1 Module is configured (so normally expected
set).
2 Code CRC fault.
3 High temperature warning.
4 Link/bus fail.
5 Halt is active.
6 RAM fault.
7 RAM access error.
8 Relay 0 not inhibited (so normally set).
9 Relay 1 not inhibited.
10 Relay 2 not inhibited.
11 Relay 3 not inhibited.
12 Relay 0 drive failure.
13 Relay 1 drive failure.
14 Relay 2 drive failure.
15 Relay 3 drive failure.
Status Response Codes
0: Normal / no exception.
1: Invalid command / command not recognized.
2: Not used.
3: Message 2 and message 1 data content does not agree.
4: Not used.
5: No message 1 data was received (send only if message 2 data is received).
6: Module not configured.
7: Not used.
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
CIP Objects
Description (Expansion Relay Module 1)
16 Relay module 0 (address 1) status.
17
18
19 Relay module 1 (address 2) status.
20
21
22 Relay module 2 (address 3) status.
23
24
25 Analog Output module status.
26
27
28 Tachometer Signal Conditioner module
status.
29
30
31 Spare
Appendix A
523