Table of Contents
Advertisement
DC
While the dynamic measurement module is designed for measuring dynamic
signals, such as vibration, it is also capable of many types of static (DC) type
measurements, such as thrust, differential expansion, or rod drop. This page is
where these values are configured.
This page is available only for channels that are defined for Static
measurements (see Channel Type,
The following statements are important to remember when working with DC
measurements:
• While the parameters associated with all supported DC measurements
are presented, only those parameters appropriate to the measurement
taken must be configured.
• Measurements such as thrust, differential expansion, and valve position
are critical to the safe operation of the machine. Care must be taken to
make sure the sense control and calibration offset are correctly
configured for the DC measurements being monitored, and reflect the
conditions as expected when monitoring the machines.
The following is a summary overview of each of the DC measurements the
module can do and that are configured on this page.
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Measurement Definition
General Page on page
97).
Chapter 4
155
Hide quick links:
Advertisement
Table of Contents
