Table of Contents
Advertisement
Chapter 2
Install the Dynamix 1444 Series Monitoring System
Supply 0
24VDC
Power
Supply
54
Figure 11
shows positive and negative power IN connections to the first of two
identical connectors for each, and power OUT from the second of two
identical connectors. See
power connections.
Figure 11 - Typical Wiring for Redundant Power Solutions to Multiple Modules
Supply 1
24VDC
Power
Supply
Buffered Output Override
The Buffered Output 'Override' connections, pins 57 and 58 on the 1444-TB-
A terminal base, are used to enable/disable the buffered outputs.
The buffered outputs are enabled (powered) when no connection is present
between pins 57 and 58.
The buffered outputs are disabled (not powered) when a connection is present
between pins 57 and 58.
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Upper Base Connector on page 51
58
57
OVR
OVR
for the list of
Hide quick links:
Advertisement
Table of Contents
