Table of Contents
Advertisement
Product Description/System
Overview
• Over 20 different measurement parameters per measurement channel,
such as RMS, peak, FFT band RMS, order magnitudes, phase, and
speed
• On-board storage of:
– Trend data (discrete and dynamic data records)
– Alarm/Event data (discrete and dynamic data records)
– Transient data (discrete and dynamic data records)
• Expansion modules available to enhance system capabilities:
– 4-channel Relay output module (up to three per each DYN module)
– 2-channel Tacho Signal Conditioning module
– 4-channel 4...20 mA output module
The Dynamix series consists of six core part numbers and various accessories
for connectors and cables.
A minimum Dynamix 1444 Series monitoring system consists of the
following:
• One DYN module, which is composed of a terminal base, a module, and
either spring or screw clamp removable plug connectors for both the
module and terminal base.
• Appropriate enclosure
• Sensors
• Power supply unit
Expansion modules provide enhanced or optional I/O capabilities that are
application-dependent:
• 4-channel relay output modules (RELX)
• 4-channel 4...20 mA output module (AOFX)
• 2-channel Tacho Signal Conditioning module (TSCX)
Up to three RELX modules and one each AOFX and TSCX module can be
connected to one DYN module. Interconnections between a DYN module
and its expansion module (and to extend the tacho bus from one such group to
further DYN modules) are by ribbon cable assembly.
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
About the Dynamix 1444 Series Dynamic Measurement Module
Chapter 1
15
Hide quick links:
Advertisement
Table of Contents
