Engineering Units - Allen-Bradley 1444-TSCX02-02RB User Manual

General Code Extended
Code
0x1004
0x1E
0x20 <0x1FFFFFFF
Table 315 - CIP Engineering Unit List
Value/ID Index
0x1200 24
0x1201 22
0x1202 23
0x1300 16
0x1307 14
0x1308 15
0x1309 19
0x130A 18
0x0C00 17
0x1500 12
0x1502 37
0x1504 10
0x0B00 8
0x0B01 11
0x0A00 (10)
0x1703 -
0x1C00 20
0x1C02 21
0x1F0F -
0x0F01 -
Description
Dynamic data requests and special service requests are not allowed while the module is in Program Mode (while the module is being
configured).
Embedded service error. The requested inter-processor message exchange (NetX to DSP and/or to an auxiliary module) failed to
complete so the requested data cannot be returned.
Invalid parameter in one or more configuration groups.
Bits 0 to 28 represent groups 1 to 29, if a group is in error the appropriate bit is set to 0/cleared.
Example: 0x1FFCFFFF
Ox1FFFFFFF - 0x1FFCFFFF = 0x300000
As binary: 11 0000 0000 0000 0000
So: Groups 17/18

Engineering Units

The module supports a subset of the standard and custom CIP Engineering
unit lists, appropriate to the selected Channel Application Type.
Name
°C
°F
K
psi
bar
mbar
Pa
kPa
MPa
2
m/s
2
in./s
g
2
mm/s
mg
gSE
degree
A
mA
RPM
RPM/min
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Description
Temperature measurement application types (There is no conversion between temperature
units, separate application types apply to each).
Dynamic pressure measurement application.
Vibration acceleration measurement applications.
Spike energy measurement application.
Phase angle measurement (orders/SMAX).
Current measurement application types.
Available only when the application uses one or more of the two available tacho inputs
CIP Objects Appendix A
543