Table of Contents
Advertisement
Appendix A
CIP Objects
482
Enable
A bit-wise enable control, per instance/channel.
Table 228 - Enable
Value
0
1
2
3
4...7
Waveform averaging is only a valid selection when waveform is enabled, the
Advanced CM data source is set to the Alternate path and is configured for
synchronous sample generation. Refer also the Channel Set Up Object.
FFT Averaging is only a valid selection when FFT is enabled. If the FFT,
Waveform, Waveform Averaging, and FFT Averaging bits are all set, Waveform
Averaging is not performed while the other selections are performed.
It is possible to specify both FFT and Waveform for a channel. Waveform,
Waveform Averaging, and FFT is also a valid combination. FFT, Waveform,
and FFT Averaging is also a valid combination.
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Description
FFT
Waveform
Waveform Averaging
FFT Averaging
Reserved
Hide quick links:
Advertisement
Table of Contents
