Resetting the Module
Operate the Module
Topic
Resetting the Module
Updating Module Firmware
Updating Expansion Module Firmware
Managing GET and SET Service Access
Managing Nonvolatile Memory Configuration
Setting the IP Address
Time Management
Module Inputs
Module Outputs
Services
I/O Message Formats
Calibration
Accuracy
Status Page
Status Indicators
This chapter describes the reset types that the module offers.
Supported Reset Types
The module supports three forms of resets including types 0, 1 and 2.
Reset Type Methods
Common Reset (0)
Out of Box Reset (1)
Hard Reset (2)
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Hardware
Power cycle
Power cycle with 888 address
—
10
Chapter
Page
241
246
249
251
252
253
256
257
262
263
263
292
292
303
308
Remote Reset Service (Code 5)
Remote Reset is not allowed while a
class 1 connection is active, or if the
class 1 connection was closed
abnormally.
Send data value
0 (or blank)
1
2
241