Allen-Bradley 1444-TSCX02-02RB User Manual page 524

Appendix A CIP Objects
524
Table 279 - Analog Output Module / Tacho Signal Conditioner Status
Bit Description (Analog Output Module)
0 Analog output module not responding. If set
disregard other bits in this group.
1 Module is configured (so normally expected
set).
2 Code CRC fault.
3 High temperature warning.
4 Link/bus fail.
5 Halt is active.
6 RAM fault.
7 RAM access error.
8 Channel 0 not inhibited (so normally set).
9 Channel 1 not inhibited.
10 Channel 2 not inhibited.
11 Channel 3 not inhibited.
12 Spare
13
14
15
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Bit Description (Tacho Signal Conditioner)
16 Tacho signal conditioner module not
responding. If set disregard other bits in this
group.
17 Module is configured (so normally expected
set).
18 Code CRC fault.
19 High temperature warning.
20 Link/bus fail.
21 Halt is active.
22 RAM fault.
23 RAM access error.
24 Spare
25
26 Speed 0 Estimated.
27 Speed 1 Estimated.
28 +25V5 supply fail.
29 -25V5 supply fail.
30 Tacho 0 sensor fault.
31 Tacho 1 sensor fault.