Table of Contents
Advertisement
About the Dynamix 1444 Series Dynamic Measurement Module
Chapter 1
System Enclosure
An IP54 weatherproof enclosure is recommended for general applications and
required for use in hazardous area locations.
Use of a metal enclosure is recommended to enhance EMC and thermal system
performance.
Cable, Connector, and Mounting Accessories
Local Bus (Module to Module, Interconnect Cables)
1444 series modules are connected through a local bus and implemented by
using a simple ribbon cable that spans one module to the next. The packaging
for each terminal base includes a cable that is designed to the exact length
necessary to connect two adjacent modules.
The extended interconnect cables provide a means to extend the local bus
between terminal bases on different DIN rails or in different areas of a cabinet.
Extended interconnect cables are rated to 300V and from -40...105 °C
(-40...221 °F).
The accessory list also includes a package of four standard length interconnect
cables (catalog number 1444-LBIC-04). These cables can be used to replace
the cable included with each terminal base.
Ethernet Cables
The 1444 products are designed to operate in harsh industrial environments
and possibly close to electrically noisy or high-voltage devices and wiring. You
must consider the environment, over the entire run of the cable, when
determining an appropriate cable for the application.
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
17
Hide quick links:
Advertisement
Table of Contents
