Environment And Enclosure; Prevent Electrostatic Discharge - Allen-Bradley 1444-TSCX02-02RB User Manual

Chapter 2 Install the Dynamix 1444 Series Monitoring System
22

Environment and Enclosure

ATTENTION: This equipment is intended for use in a Pollution Degree 2 industrial
environment, in Overvoltage Category II applications (as defined in IEC 60664-1), at
altitudes up to 2000 m (6562 ft) without derating.
This equipment is not intended for use in residential environments and does not provide
adequate protection to radio communication services in such environments.
This equipment is supplied as open-type equipment for indoor use. It must be mounted within
an enclosure that is suitably designed for those specific environmental conditions that are
present. It must be appropriately designed to help prevent personal injury that results from
accessibility to live parts. The enclosure must have suitable flame-retardant properties to help
prevent or minimize the spread of flame. The enclosure must comply with a flame spread
rating of 5VA or be approved for the application if nonmetallic. The interior of the enclosure
must be accessible only by the use of a tool. Subsequent sections of this publication contain
more information regarding specific enclosure type ratings that are required to comply with
certain product safety certifications.
For additional information, see:
• Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1, for
additional installation requirements
• NEMA Standard 250 and IEC 60529, as applicable, for explanations of the degrees of
protection provided by enclosures

Prevent Electrostatic Discharge

ATTENTION: This equipment is sensitive to Electrostatic Discharge, which can cause internal
damage and affect normal operation. Follow these guidelines when you handle this
equipment:
• Touch a grounded object to discharge potential static.
• Wear an approved grounding wriststrap.
• Do not touch connectors or pins on component boards.
• Do not touch circuit components inside the equipment.
• Use a static-safe workstation, if available.
• Store the equipment in appropriate static-safe packaging when not in use.
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018