Table of Contents
Advertisement
Buffers
Table 77 - Buffers
Parameter
Values
Alarm Buffer
0 - Disabled
1 - Armed
2 - Populating
3 - Ready
4 - Latched
Transient Buffer 0
0 - Free
Transient Buffer 1
1 - Populating
Transient Buffer 2
2 - Ready
Transient Buffer 3
3 - Latched
Reset
Pressing reset clears the latch on a latched buffer.
Module Firmware
This section presents the firmware revision for the main and all connected
expansion modules.
There are dependencies that require specific revisions of module firmware, and
expansion module firmware, for each revision of the AOP. The current
firmware and AOP revisions are shown in
this page do not match those revisions that are shown in
modules must be updated to the specified firmware revisions.
All module and expansion module firmware must be at the revisions that are
listed when used with the indicated revision of AOP.
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
This buffer is not being captured
Waiting for alarm event trigger
Alarm event in progress
Alarm data available
Alarm data available and is latched
Available, ready for a transient event
Acquiring transient data
Transient data available
Transient data available and is latched
Table
78. If revisions presented on
Operate the Module
Chapter 10
Table
78, then the
305
Hide quick links:
Advertisement
Table of Contents
