Dynamix Configuration Manager Object; Class Attributes - Allen-Bradley 1444-TSCX02-02RB User Manual

Appendix A CIP Objects
Dynamix Configuration
Manager Object
Table 87 - Class Attributes
Attribute ID Access Rule
1 Get
8 Get
9 Get/Set
10 Get/Set
11 Get/Set
12 Get/Set
13 Get/Set
14 Get/Set
15 Get/Set
16 Get/Set
17 Get/Set
18 Get/Set
19 Get/Set
338
The Dynamix configuration manager object (class code 0x38A) defines the
personality of the module that is based on the selected module type and
channel application types. It also provides the means by which a complete
configuration is downloaded to the module.
For this latter purpose, the configuration assembly of the module is 'condensed'
into class attributes 9 to 37 of this object. Each of these attributes is used to
transfer 1 of the 29 configuration groups, where a group often contains
configuration attributes from multiple objects. A Pre-Apply Attributes service
(0x4B) is then sent which causes the module to verify that configuration. Once
a downloaded configuration is accepted as valid, the module populates all
appropriate objects and attributes with the revised configuration. This
unpacking and dissemination of the configuration information means that
targeted requests can be made to ascertain specific aspects of the configuration,
without needing to parse large data structures.
Instance ID
0
1

Class Attributes

The Configuration Manager Object supports the following class attributes.
Note that attributes 9...37 form the module configuration assembly. The total
size of the configuration is 5704 bytes. The structures referred to here are
defined down to their elemental data types in the behavior section. Further
information on each configuration attribute can be found in their source/
originating object.
NV Name
NV Revision
NV Template Revision
NV Configuration Group 1
NV Configuration Group 2
NV Configuration Group 3
NV Configuration Group 4
NV Configuration Group 5
NV Configuration Group 6
NV Configuration Group 7
NV Configuration Group 8
NV Configuration Group 9
NV Configuration Group 10
NV Configuration Group 11
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Description
Class Instance of the Configuration Manager Object
Instance 1
Description of Attribute
Defines revision of Dynamix Configuration Manager
Object
See structure definition
See structure definition
See structure definition
See structure definition
See structure definition
See structure definition
See structure definition
See structure definition
See structure definition
See structure definition
See structure definition