Dynamix Mux Object - Allen-Bradley 1444-TSCX02-02RB User Manual

Appendix A CIP Objects
492
Table 239 - Instance Attributes (continued)
9 Get V
Time Slot Configuration
16 Get V
17 Get V
18 Get V
19 Get V
Table 240 - Common Services
Service Implementation
Code
Class Instance
0x0E x x

Dynamix MUX Object

The Dynamix MUX Object (class 0x39B) defines and controls a multiplexing
capability of a main module. The appropriate choice of the Module Type
enables Multiplexing.
Multiplexing is not a means to connect different signals to the inputs. Rather it
is to provide a method to allow use of all four channels when the sample rate
requirement is greater than the module can perform continuously on four
channels.
Table 241 - Object Instances
Instance ID
0
1
Table 242 - Object Attributes
Attribute Access Rule NV
ID
1 Get NV
8 Get NV
9 Get NV
10 Get -
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Time Slot 3 REAL Time Slot 3 Settling
Settling Time Time
Group of 4 configuration attributes.
Time Slot 0 DAQ INT Time Slot 0 DAQ Time
Time Multiplier Multiplier
Time Slot 1 DAQ INT Time Slot 1 DAQ Time
Time Multiplier Multiplier
Time Slot 2 DAQ INT Time Slot 2 DAQ Time
Time Multiplier Multiplier
Time Slot 3 DAQ INT Time Slot 3 DAQ Time
Time Multiplier Multiplier
Service Name Description of Service
Get Attribute Single Returns the contents of the specified attribute
Description
Class Instance for the MUX Object
Instance 1
Name Data Type
Revision UINT
MUX Configured BOOL
Number of USINT
enabled
subchannels
Overall cycle time REAL
s
Range: 1...255
Default: 1
Range: 1...255
Default: 1
Range: 1...255
Default: 1
Range: 1...255
Default: 1
Description of Semantics
Attribute of Values
The MUX object -
revision
Yes = this 1 = Yes
configuration
uses MUX
Not Used Fixed at 1
Time to complete s (actual
to MUX cycle measured)