Table 16 - Input Data
Parameter
Values
Order (n) magnitude
Checked (1)
Unchecked (0)
Order (n) Phase
Checked (1)
Unchecked (0)
Bias / Gap
Checked (1)
Unchecked (0)
FFT Band (n)
Checked (1)
Unchecked (0)
Comments
Check this parameter to include the Order (n) magnitude member for the selected channel to the input tag.
Channel
Tag Member
0
Ch0Order[n]Mag
1
Ch1Order[n]Mag
2
Ch2Order[n]Mag
3
Ch3Order[n]Mag
Check this parameter to include the Order (n) Phase member for the selected channel to the input tag.
Channel
Tag Member
0
Ch0Order[n]Phase
1
Ch1Order[n]Phase
2
Ch2Order[n]Phase
3
Ch3Order[n]Phase
Check this parameter to include the Bias / Gap (DC Volts) member for the selected channel to the input tag.
Channel
Tag Member
0
Ch0DCV
1
Ch1DCV
2
Ch2DCV
3
Ch3DCV
Check this parameter to include the FFT Band n member for the selected channel to the input tag.
Channel
Tag Member
0
Ch0FFTBand[n]
1
Ch1FFTBand[n]
2
Ch2FFTBand[n]
3
Ch3FFTBand[n]
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
Configure the 1444 Dynamic Measurement Module
Chapter 3
105