Allen-Bradley 1444-TSCX02-02RB User Manual page 527

Output Assembly
The output assembly includes a fixed 2 integer "Control" tag, of which only the
first integer is used. Optionally, the Control Tag may be followed by 2, 16 or 18
REALs.
Table 282 - Output Control Tag
Bit Description
0 Trip (alarm) Inhibit (Bypass).
1 Set Point Multiplier Enable 0.
2 Set Point Multiplier Enable 1.
3 Speed0 ok status.
4 Speed1 ok status.
5 Gate0 control.
6 Gate1 control.
7 Alarm reset.
8 Alarm buffer trigger.
9 Alarm buffer reset.
10 Transient buffer0 reset.
11 Transient buffer1 reset.
12 Transient buffer2 reset.
13 Transient buffer3 reset.
14 Maximum speed measurement reset (all
speeds).
15 Spare
Notes
If any of the expansion relay modules are not present, their control and indication can be configured and
used as virtual relays.
Table 283 - Output Speed Tag (Optional)
REAL Description
0 Speed 0
1 Speed 1
Note
The speed tag is an optional array "Speed[2]" of two RPM values that the module can use as input to
either of its speed measurements. The tag is included in the output when specified in Module
Definition.
Rockwell Automation Publication 1444-UM001D-EN-P - June 2018
CIP Objects
Bit Description
16 Spare
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Appendix A
527